Worthington Dentist

Carotid Intima-Media Thickness Test / CIMTWorthington, OH

Request An Appointment

What is a Carotid Intima-Media Thickness Test?

A carotid intima-media thickness test (CIMT), also known as a carotid artery IMT ultrasound scan, uses ultrasound to measure the thickness of the intima and media, the two inner layers of the carotid artery. These measurements can help physicians assess the health of the carotid arteries and the risk of cardiovascular disease-related events like heart attacks and strokes, even in asymptomatic patients. Risk factors for increased carotid intima-media thickness include:

  • aging
  • high cholesterol
  • high blood pressure
  • smoking
  • diabetes
  • obesity
  • an inactive lifestyle
  • family history of heart attacks or strokes

Please watch these videos to learn more:

What are some common uses of the procedure?

CIMT is used to diagnose and determine extent of plaque buildup in the walls of the vessels supplying oxygenated blood to the head. Increased thickness in the intima and media is associated with an increasingly diseased artery. Because there is a link between intimal medial thickness and cardiovascular events, CIMT is an important test for detecting disease in its earliest stage, even before you have any symptoms, when interventions such as diet, lifestyle, and medications can have the greatest impact.

How should I prepare for a CIMT?

Wear comfortable, loose-fitting clothing. You may need to remove all clothing and jewelry in the area to be examined.

A loose-fitting, open necked shirt or blouse is ideal.

No other preparation is required.

What does the ultrasound equipment look like?

Ultrasound scanners consist of a computer console, video display screen and an attached transducer. The transducer is a small hand-held device that resembles a microphone. Some exams may use different transducers (with different capabilities) during a single exam. The transducer sends out inaudible, high-frequency sound waves into the body and then listens for the returning echoes. The principles are like sonar used by boats and submarines.

The technologist applies a small amount of gel to the area under examination and places the transducer there. The gel allows sound waves to travel back and forth between the transducer and the area under examination. The ultrasound image is immediately visible on a video display screen that looks like a computer monitor. The computer creates the image based on the loudness (amplitude), pitch (frequency) and time it takes for the ultrasound signal to return to the transducer. It also considers what type of body structure and/or tissue the sound is traveling through.

How does the procedure work?

Ultrasound imaging is based on the same principles involved in the sonar used by bats, ships, and fishermen. When a sound wave strikes an object, it bounces back, or echoes. By measuring these echo waves, it is possible to determine how far away the object is as well as the object's size, shape, and consistency. This includes whether the object is solid or filled with fluid.

In medicine, ultrasound is used to detect changes in the appearance of organs, tissues, and vessels and to detect abnormal masses, such as tumors. It is commonly used to look at unborn babies in the womb.

In an ultrasound exam, a transducer both sends the sound waves and records the echoing waves. When the transducer is pressed against the skin, it sends small pulses of inaudible, high-frequency sound waves into the body. As the sound waves bounce off internal organs, fluids and tissues, the sensitive receiver in the transducer records tiny changes in the sound's pitch and direction. These signature waves are instantly measured and displayed by a computer, which in turn creates a real-time picture on the monitor. One or more frames of the moving pictures are typically captured as still images. Short video loops of the images may also be saved.

The ultrasound device utilizes sophisticated digital imaging and special software to accurately measure the thickness of the inner two layers of the carotid artery and detect plaque if present.

How is the procedure performed?

For a CIMT ultrasound, you will lie face-up on an exam. Patients head may be turned to either side to improve the quality of the images.

A clear water-based gel is applied to the area of the body being studied. This helps the transducer make secure contact with the body and eliminate air pockets between the transducer and the skin that can block the sound waves from passing into your body. The technologist or radiologist places the transducer on the skin in various locations, sweeping over the area of interest. The sound beam may also be angled from a different location to better see an area of concern.

A CIMT examination is usually completed in approximately 20 minutes. The test generates a CIMT measurement and multiple artery images. A report is available in a week or two after being computer evaluated and then read by a certified interpreter.

When the exam is complete, the ultrasound will be briefly reviewed with you. A full review of the findings will be done later after the full computer analysis is complete.

What will I experience during and after the procedure?

Most ultrasound exams are painless, fast, and easily tolerated.

After you are positioned on the examination table, the radiologist or sonographer will apply some warm water-based gel on your skin and then place the transducer firmly against your body, moving it back and forth over the area of interest until the desired images are captured. There is usually no discomfort from pressure as the transducer is pressed against the area being examined.

If scanning is performed over an area of tenderness, you may feel pressure or minor pain from the transducer.

Your head will be supported to keep it still, but it may be necessary to tilt or rotate your head for the best exposure as the transducer is swept over the entire length of your neck on both sides to obtain views of the artery from different perspectives. It also helps to keep your arm and shoulder down.

Once the imaging is complete, the clear ultrasound gel will be wiped off your skin. Any portions that are not wiped off will dry quickly. The ultrasound gel does not usually stain or discolor clothing.

After an ultrasound examination, you should be able to resume your normal activities immediately.

Who interprets the results and how do I get them?

A radiologist, a doctor trained to supervise and interpret radiology exams, will analyze the images. The radiologist will send a signed report to the doctor who requested the exam. Your doctor will then share the results with you. In some cases, the radiologist may discuss results with you after the exam.

Follow-up examinations may be necessary, and your doctor will explain the exact reason why another exam is requested. Sometimes a follow-up exam is done because a suspicious or questionable finding needs clarification with additional views or a special imaging technique. A follow-up examination may also be necessary so that any change in a known abnormality can be monitored over time. Follow-up examinations are sometimes the best way to see if treatment is working or if an abnormality is stable or changes over time.

What are the benefits vs. risks?


  • A CIMT ultrasound is totally noninvasive (no needles or injections).
  • Ultrasound is widely available, easy-to-use and less expensive than most other imaging methods.
  • Ultrasound imaging is extremely safe and does not use radiation.
  • Ultrasound scanning gives a clear picture of soft tissues that do not show up well on x-ray images.
  • If CIMT shows thickening in the carotid artery, treatment can be initiated to reduce the risks associated with the development of atherosclerosis.
  • CIMT can be used repeatedly with no adverse effects.
  • CIMT scanning protocol can detect atherosclerotic diseases in their early stage, before symptoms appear, and long before other tests such as stress tests will become abnormal.
  • CIMT allows for observation of the arterial wall, the actual site of the atherosclerotic disease, rather than the lumen.
  • CIMT is not dependent on calcification of the plaque like other assessment tools such as cardiac CT for calcium scoring.


  • Standard diagnostic ultrasound has no known harmful effects on humans.

What are the limitations of a Carotid Intima-Media Thickness Test?

  • Occasionally, imaging a patient is difficult because of the size or contour of the neck.
  • Calcium deposits in the wall of the carotid artery may make it difficult to evaluate the vessel.
  • CIMT is only an indirect assessment of the possible atherosclerotic burden in the coronary arteries. However, multiple scientific studies have shown a strong correlation between an abnormal CIMT scan and the development of heart attacks and strokes.

Contact Us

The Heart Attack Stroke Prevention Center of Central Ohio is located at 350 West Wilson Bridge Road Suite 320-A Worthington, OH 43085.

(614) 360-9386